Safety is paramount in the design, manufacturing and test processes used in our safe, highly accurate and reliable detonator initiation products.
Reliable high voltage wire and cable are essential components of every explosive initiation system where EBW or EFI initiators are used.
- The type 'C' coaxial cable, rated at 25 kV DC, is recommended where shielding, precise timing or firing lines exceeding 100ft in length are required.
- The type 'L' coaxial cable, rated at 18 kV DC, is recommended where shielding, precise timing or firing lines exceeding 100ft in length are required.
The twin lead high voltage blasting wire, rated at 5 kV DC, is ideal for general blasting where firing lines do not exceed 100ft in length. Both of these products are rugged and suitable for field use. 'C' cable is available in spools of 250ft and blasting wire in 1,000ft spools.
Fire SetsWe manufacture a complete line of EBW and EFI Firing Systems – designed to allow remote arming and firing of initiators and to ensure operator safety.
FM150-2
Firing Module for use with all Teledyne EBW detonators:
- Used in conjunction with FD201-2 Control Module
- 4kv Firing Unit
- Remote Arm
- Automatic safing
- Charged warning lamp independent of input supply
- Rugged enclosure
|
|
FD201-2
Control module for use with all Teledyne EBW detonators, ideally suited for range applications:
- Battery powered
- Waterproof and dustproof
- Separate high voltage module (FM150)
- External control and synchronisation
- High Voltage metre
- Coaxial output
- Up to 1000m from charge
- Delay function
FD202
Control module for use with all Teledyne EFI detonators, ideally suited for laboratory applications:
- Requires external power
- Waterproof and dustproof
- Uses separate high voltage module (FM160)
- Up to 100m from FM160
Firing Module for use with low voltage EFI detonators (LEEFI), ideally suited to laboratory applications:
- Used in conjunction with FD202
- Stripline output
- Output voltage 1.5kV Output
- Voltage monitor sockets
Single Channel Firing Modules
Single channel to Multiple output devices intended for a wide range of defence applications:
- High degree of simultaneity
- Battery powered
- Portable
- IP65 – Water resistant
- Remote control unit for use up to 100m
Multi-Channel Control Modules
Multiple output devices of up to 6 separate channels intended for laboratory use where multiple initiations are required to highly accurate timing control:
- Each channel delay between 0.1µs and 99.9999ms
- Up to 6 channels
- Independent Arm on each channel
- Each channel has independent 60V and 5V sync. Signals
- Meter showing Armed voltage of each FM150
- Separate high voltage module (FM150)
Special Products
- Tailored equipment to customer requirements
- Single channel and multi-channel solutions available for a wide range of defence applications
- A highly specialised area of expertise is the Teledyne Reynolds initiation and ordnance range of capabilities and products.
Safety is paramount in the design, manufacturing and test processes used in our safe, highly accurate and reliable detonator initiation products.
Applications come from many markets including:
- Mining
- Sub-sea exploration & production
- Research & development programmes
- Geophysical applications
- Military programmes (such as ordnance disposal)
- Commercial uses (such as demolition).
